Crop agriculture residue burning is a common feature in NCT Delhi and even in the surrounding states like Uttar Pradesh, Punjab, Rajasthan and Haryana. These states, particularly, Uttar Pradesh, Rajasthan, Haryana and Punjab and areas of Delhi have two or more growing seasons-one from May to September and another from November to April. The farmers often set fire to field to clear the residue of the crop/plants. The standing straw is burnt to clear the fields. This practice is even prevalent in other parts of the country.

The rice and wheat system (RWS) is one of the widely practiced cropping systems in northern India. About 90-95 percent of the rice area is used under intensive rice wheat system (RWS) in Punjab. Widespread adoption of green revolution technologies and high yielding variety of seeds increased both, crop as well as crop residue and combine harvesting is one such input, particularly in the RWS. It is notable that in the RWS, a short period of time is available between rice harvesting and wheat plantation and any delay in planting adversely affects the wheat crop. This coupled with and combine harvesting is one such input, particularly in the RWS.

It is notable that in the RWS, a short period of time is available between rice harvesting and wheat plantation and any delay in planting adversely affects the wheat crop. This coupled with combine harvesting compels the farmers to burn the residue to get rid of stubble left out after the harvest. Farmers burn stubble mainly due to economic reasons and time constraints. After harvesting rice or wheat, there is a short window to prepare fields for the next crop. Burning stubble is often seen as a quick and cost-effective method compared to other labor-intensive alternatives.

The smoke from agriculture residue burning can harm the human health, aggravating heart and lung diseases. Crop residue burning are considered a major source of carbon dioxide (CO2), carbon monoxide (CO), methane (CH4), volatile organic compounds (VOC), nitrogen oxides and halogen compounds. The greenhouse gases CO2 and CH4 directly influence the global warming, while changes in oxidizing capacity to CO variability could perturb the growth rates of greenhouse gases. Burning of straw emits emission of trace gases like CO2, CH4, CO, N2O, NOX, SO2 and large amount of particulates which cause adverse impacts on human health.

Stubble burning emits toxic pollutants in the atmosphere containing harmful gases like Carbon Monoxide (CO), methane (CH4), carcinogenic polycyclic aromatic hydrocarbons, volatile organic compounds (VOC). These pollutants disperse in the surroundings and eventually affect air quality and people's health by forming a thick blanket of smog. Soil becomes less fertile and its nutrients are destroyed when the husk is burned on the ground. Stubble burning generates heat that penetrates into the soil, causing an increase in erosion, loss of useful microbes and moisture.

Stubble burning releases harmful particulate matter and gases into the air, leading to increased levels of pollution. This can have severe consequences for public health, particularly causing respiratory problems and exacerbating existing conditions like asthma.

36663 no. of fire incidents were recorded in Punjab during paddy harvesting season 2023.

There is 26.55% reduction in stubble burning incidents in Paddy Harvesting season 2023 w.r.t 2022.

There is 48.85% reduction in stubble burning incidents in Paddy Harvesting season 2023 w.r.t 2021.

The Govt. is insuring the compliance of the order passed by the Hon’ble NGT on 10.12.2015 in OA no.118 of 2013 regarding imposition of environmental compensation on the violators as under:

1. 2500 per incidence on the small land holders having an area less than 2 acres.
2. 5000/- per incidence on the land holders having land area more than 2 acres but Less than 5 acres.
3. 15000/- per incidence on the land holders having land area more than 5 acres.

Crop residue ex-situ management refers to the removal of crop residue from the field for use as a source of fuel, fodder, or compost. Ex-situ management methods can help reduce air pollution caused by burning crop residues and provide a natural source of nutrients for the soil. Here are some commonly used ex-situ crop residue management methods:

1. Biomass power generation: Crop residues can be used as a source of fuel for biomass power generation. This method involves burning crop residues to produce electricity or heat.
2. Animal feed: Crop residues can be used as a source of animal feed, particularly for livestock such as cattle, sheep, and goats. Crop residues can be baled and stored for use as animal feed during the dry season when forage is scarce.
3. Composting: Crop residues can be composted to produce a nutrient-rich soil amendment. This method involves collecting the crop residues and mixing them with other organic materials such as manure, leaves, and grass clippings. The compost can then be used to improve soil fertility and structure.
4. Biochar production: Biochar is a type of charcoal that is produced by heating crop residues in the absence of Biochar can be used as a soil amendment to improve soil fertility, water retention, and crop productivity.
5. Industrial uses: Crop residues can be used in various industrial processes, such as the production of paper, textiles, and building materials.

A pelletization plant, also known as a pelletizing plant or pellet plant, is a facility that processes raw materials (such as biomass, or other materials) into pellets. Pellets are small spherical or cylindrical shapes typically used as feedstock in various industries in boilers, brick kiln etc.

In-situ management of crop residue refers to the management of paddy straw within the farm fields. This process can be broadly categorised under incorporation of paddy straw and retention of paddy straw on the surface of farm field as mulch.

1. Incorporation: In this method size of paddy straw is reduced by mulcher/straw choppers and it is mixed with the soil using relevant farm machinery. This involves tillage and subsequent land preparation operations to obtain a workable seed bed. With this method paddy straw is decomposed and releases its nutrients in the soil thus making it more fertile. It also enriches soil's organic matter and  enhances  its  water  holding    Long  term experiments have shown an increase in crop yield at every subsequent year.
2. Mulching: In this technique paddy crop is harvested by combine equipped with Super SMS and remaining straw is evenly distributed in the farm field. Sowing of wheat is done without any tillage operation and seed is placed beneath the layer of paddy straw in the farm field. This method is the most cost effective and bears equivalent yield statistics with other conventional methods. Apart from this mulching restricts the weed infestation and retains the moisture in root zone. It has also been observed that mulching protects the crop from lodging in windy conditions and also prevented occurrence of shrivelled grains in a condition of sudden rise in temperatures in months nearing harvesting of the crop.
   

The State has taken many initiatives to control practice of paddy residue burning by in-
situ management during the last years with details as under:

1. Sustaining/ diversifying area from paddy to other The paddy-wheat rotation has proved to be the most economical and mechanized rotation in the State than all other crop rotations such 3 as cotton-wheat, maize-wheat have many issues and do not compete with the paddy-wheat rotation.
2. Implementation of “Central Sector Scheme for Promotion of Agricultural Mechanization for Insitu Management of Crop Residue”. The scheme is being implemented in the state since 2018- Under the scheme, the subsidy is being provided @ 50% to individual farmers and @ 80% to registered farmer groups, panchayats, cooperative societies and farmer producer organizations (FPOs) for procurement of machinery for in-situ/ex- situ management of paddy straw 1,38,022 CRM Machines have been provided to the farmers and 24,736 custom hiring centers have been established/ strengthened.

The State has taken many initiatives to control practice of paddy residue burning by ex-situ management during the last years with details as under:

1. The paddy straw is being promoted to be used in Biomass Power Plants, CBG plants, Industrial Boilers, Pelletization The Punjab Government is actively promoting the ex-situ utilization of paddy straw.
2. The State has also been able to collect and store paddy residue in Collection Centers by Biomass Industries; cattle ponds; Gaushalas and other common lands available in the villages for use as cattle feed for the landless farmers within the State as well as outside the State. Punjab Govt. is seized of the menace of stubble burning and taking various preventive steps for the last many years through prohibitory orders as well as generating awareness among farmers regarding ill effects of stubble burning on soil and environment. The State of Punjab has taken and is taking all the possible steps for the prohibition and control of stubble burning. The State Government is further strengthening the use of in-situ and ex-situ management options and IEC activities amongst the farming community for making behavioral change so as to totally eradicate the stubble burning incidents in the year 2024.

Following are the prohibitory order on being of crop residue:-

1. Orders dated 22.10.2013 by Department of Science, Technology and Environment, Govt. of Punjab.

To curb the menace of stubble burning during post-harvesting season in the State, the Government of Punjab, Department of Science, Technology and Environment in exercise of the powers conferred under section 19(5) of the Air (Prevention & Control of Pollution) Act, 1981 in consultation with the Punjab Pollution Control Board vide notification no. 946 dated 22/10/2013 has prohibited the burning of agriculture residue in the State of Punjab. Any violation of this notification is punishable under section 39 of the Air (Prevention & Control of Pollution) Act, 1981 by filing a criminal complaint in the court of Judicial Magistrate first class.

2.  Order dated 10.12.2015 passed by National Green Tribunal (NGT)

NGT has vide order dated 10.12.2015 in OA no.118 of 2013 prohibited the burning of paddy straw and passed detailed directions to meet the challenges arising from the burning of paddy straw. It also provides imposing environmental compensation against defaulter.

“Any person or body that is found offending this direction would be liable to pay environmental compensation as follows:

• Small land holders having an area less than 2 Acres shall pay Environmental Compensation of Rs. 2500/- per incidence.
• Land holders having land area more than 2 Acres but Less than  5 Acres shall pay Environmental Compensation of Rs. 5000/- per incidence.
• Land holders having land area more than 5 Acres shall pay Environmental Compensation of Rs. 15000/- per incidence”

Further, violation of ban order passed by NGT is also punishable under the relevant section of NGT Act, 2010.

3.  Order dated 7.2.2018 passed by Punjab Pollution Control Board regarding mandatory Super SMS with Combine Harvester

In order to encourage in-situ management of paddy straw, Punjab Pollution Control Board has passed order dated 7.2.2018 under section 31-A of Air (Prevention and Control of Pollution) Act,1981 making it mandatory for all the Combines to have Super SMS system fixed.

Any violation of this direction is punishable under section 37 of the Air (Prevention & Control of Pollution) Act, 1981 by filing a criminal complaint in the court of Judicial Magistrate first class.

4.  Order No. Admn. (Gen)/2020/545 dated 25.08.20 by Punjab Pollution Control Board

In compliance to the order dated 15.11.2018 passed by the Hon’ble National Green Tribunal in OA no.666 or 2018 titled as Ganga Lalwani vs. Union of India and others, the order dated 25.09.2020 passed by the Board regarding imposition of environmental compensation on harvester combines found operating without Super Straw Management System and in exercise of the powers vested in it under section 43 of the Air (Prevention and Control of Pollution) Act 1981 the Punjab Pollution Control Board has authorised and empowered the Sub-Divisional Magistrates, Circle Revenue Officers (Tehsildars and Naib-Tehsildars), Chief Agriculture Officers (in-charge of the Districts), Agricultural Development Officers (in-charge of the Blocks) and Secretary, Regional Transport Authorities to act against the persons found indulging in the burning paddy stubble and/ or operating Harvester Combines without Super SMS in the State of Punjab as under:-

1. To Impose and collect Environmental Compensation in accordance with the mandate of the order dated 12.2015 of the Hon’ble NGT in OA No. 118 of 2013 as under:
   1. Small land holders having an area less than 2 Acres: Rs. 2500/- per incidence.
   2. Land holders having land area more than 2 Acres but Less than 5 Acres: Rs. 5000/- per incidence
   3. Land holders having land area more than 5 Acres: Rs. 15000/- per incidence
2. To impose Environmental Compensation for violation of the directions dated 07.02.2018 read with order dated 25.09.2020 passed by the Punjab Pollution Control Board upon the owners of Harvester Combines found operating without functional Super Straw Management System as under:
   1. 50000/- on first violation
   2. 75000/- on second violation
   3. 100000/- on third violation and subsequent violation each
3. To file prosecution u/s 39 and section 37 of the Air (Prevention and Control of Pollution) Act, 1981 before the competent court of law for violation of the notification dated 22.10.2013 issued by the Government of Punjab, Department of Science, Technology & Environment whereby stubble burning has been prohibited, and directions dated 07.02.2018 passed by the Punjab Pollution Control Board

Whereby the attachment and use of Super Straw Management System with the Harvester Combines was made mandatory in the State of Punjab respectively. The amount of Environmental Compensation so collected should be deposited with the Member Secretary Punjab Pollution Control Board. 

5. Prohibitory orders under section 144 CrPC by District Magistrates

District Magistrates in the State pass orders under section 144 CrPC every season to prohibit burning of paddy straw. Any violation of the order passed u/s 144 of CrPC is punishable u/s 188 of CrPC.

1. At the State Level, a Committee under Chief Secretary and comprising of the Administrative Secretaries of the following Departments will coordinate, monitor and decide various issues towards effective implementation of the ban on burning paddy straw:
   • Department of Agriculture
   • Department of Science, Technology and Environment
   • Department of Cooperation
   • Department of Rural Development
   • Department of Power
   • Department of Water Resources
   • Department of Defence Services Welfare
   • Department of Information and Public Relations
   • Department of New and Renewable Energy

1. The State Government will further depute senior Administrative Secretaries in various districts to monitor the implementation of the ban. They will be assisted by Senior Officers from PPCB, PSPCL and Agriculture.
2. Chief Secretary will also review the progress with the Deputy Commissioners

• The Sub-Division Level Monitoring Committee shall consist of the following officers:
  • Sub-Divisional Magistrate            -           Chairperson
  • Deputy Superintendent of Police -           Member
  • BDPO                                           -           Member
  • Agriculture Officer                          -           Convener
• The sub-division level committee will meet daily/ alternate day and review the progress of various activities and take necessary action.

• Cluster officer will fill and duly sign the data regarding challan no & date, challan amount and challan photo in the mobile base app.
• The Cluster officers will be drawn from the block / sub-division level officers of various departments such as Agriculture, Revenue, Cooperation, Rural Development, PSPCL, Defense Welfare etc.
• Cluster Officer shall coordinate with Village Nodal Officer for various activities to control burning of stubble by the farmers.

'E-waste' means electrical and electronic equipment, including solar photo-voltaic modules or panels or cells, whole or in part discarded as waste, as well as rejects from manufacturing, refurbishment and repair processes. The E-Waste Rule enacted on 1st April, 2023 & amended on 25th July, 2023.

‘manufacturer’ means a person or an entity or a company as defined in the Companies Act, 2013 (18 of 2013) or a factory as defined in the Factories Act, 1948 (63 of 1948) or Small and Medium Enterprises as defined in the Micro, Small and Medium Enterprises Development Act, 2006 (27 of 2006), which has facilities for manufacture of electrical and electronic equipment as specified in Schedule-I.

‘producer’ means any person or entity who, -

• manufactures and offers to sell electrical and electronic equipment and their components or consumables or parts or spares under its own brand; or
• offers to sell under its own brand, assembled electrical and electronic equipment and their components or consumables or parts or spares produced by other manufacturers or suppliers; or
• offers to sell imported electrical and electronic equipment and their components or consumables or parts or spares; or
• who imports used electrical and electronic equipment; irrespective of the selling technique used such as dealer, retailer, e-retailer etc.

refurbisher' means any person or entity repairing or assembling used electrical and electronic equipment as listed in Schedule-I for extending its working life over its originally intended life and for same use as originally intended, and selling the same in the market.

‘recycler’ means any person or entity who is engaged in recycling and reprocessing of waste electrical and electronic equipment or assemblies or their components or their parts for recovery of precious, semi-precious metals including rare earth elements and other useful recoverable materials to strengthen the secondary sourced materials and having facilities as elaborated in the guidelines of the Central Pollution Control Board made in this regard.

'bulk consumer' means any entity which has used at least one thousand units of electrical and electronic equipment listed in Schedule I, at any point of time in the particular Financial Year and includes e-retailer.

All the entity under E-Waste are covered under Red Category industries.

The PPCB has not made any specific guidelines for setting up of new E-Waste Manufacturer/ Refurbisher/ Recycling only general guidelines are applicable for setting up of new E-Waste Manufacturer/ Refurbisher/ Recycler in the state of Punjab.

‘extended producer responsibility’ means responsibility of any producer of electrical or electronic equipment as given in Schedule-I for meeting recycling targets as per Schedule- III and Schedule-IV, only through registered recyclers of e-waste to ensure environmentally sound management of such waste.

Registration. –

• The entities shall register on the portal in any of the following category, namely: - (a) manufacturer; (b) producer; (c) refurbisher; or (d) recycler.
• In case any entity falls in more than one categories under sub-rule (1), then the entity shall register under those categories separately.
• No entity referred in sub-rule (1) shall carry out any business without registration.
• The entities registered under sub-rule (1) shall not deal with any unregistered manufacturer, producer, recycler and refurbisher.
• Where any registered entity furnishes false information or willfully conceals information for getting registration or return or report or information required to be provided or furnished under these rules or in case of any irregularity, the registration of such entity may be revoked by the Central Pollution Control Board for a period up to three-years after giving an opportunity to be heard and in addition, environmental compensation charges may also be levied as per rule 22 in such cases.
• The Central Pollution Control Board may charge such registration fee and annual maintenance charges from the entities seeking registration under these rules based on capacity of e-waste generated or recycled or handled by them as laid down by the Central Pollution Control Board with the approval of the Steering Committee.

The producer of electrical and electronic equipment listed in Schedule I shall be responsible for -

(1) registration on the portal;
(2) obtaining and implementing extended producer responsibility targets as per Schedule-III and Schedule-IV through the portal: Provided that the producer having extended producer responsibility plan under the provisions of the erstwhile E-Waste (Management) Rules, 2016 shall migrate under these rules as per the procedure laid down by the Central Pollution Control Board with approval of Steering Committee;
(3) creating awareness through media, publications, advertisements, posters or by any other means of communication;
(4) file annual and quarterly returns in the laid down form on the portal on or before the end of the month succeeding the quarter or year, as the case may be, to which the return relates.

All manufacturers shall have to -
(1) register on the portal.
(2) collect e-waste generated during the manufacture of any electrical and electronic equipment and ensure its recycling or disposal.
(3) file annual and quarterly returns in the laid down form on the portal on or before end of the month succeeding the quarter or year, as the case may be, to which the return relates.

All refurbishers shall have to -
(1) register on the portal.
(2) collect e-waste generated during the process of refurbishing and hand over the waste to registered recycler and upload information on the portal.
(3) ensure that the refurbished equipment shall be as per Compulsory Registration Scheme of the Ministry of Electronics and Information Technology and Standards of
Bureau of Indian Standards framed for this purpose.
(4) file annual and quarterly returns in the laid down form on the portal on or before the end of the month succeeding the quarter or year, as the case may be, to which the return relates.

All recycler shall have to -
(1) register on the portal.
(2) ensure that the facility and recycling processes are in accordance with the standards or guidelines laid down by the Central Pollution Control Board in this regard from time to time.
(3) ensure that the fractions or material not recycled in its facility is sent to the respective registered recyclers.
(4) ensure that residue generated during recycling process is disposed of in anauthorised treatment storage disposal facility.
(5) maintain record of e-waste collected, dismantled, recycled and sent to registered recycler on the portal and make available all records for verification or audit as and when required.
(6) file annual and quarterly returns in the laid down form on the portal on or before the end of the month succeeding the quarter or year, as the case may be, to which the return relates.

All information regarding requirement of documents for applying registration on EPR portal https://eprewastecpcb.in/ in SOP (Standard Operating procedures) available for Producers/ Recyclers/ Refurbishers & Manufacturer in different sections: -
Section 1: Basic Information
Section 2. Documents in support of basic information

All information regarding requirement of documents for applying CTE/ CTO/ Authorization under HoWM for Recyclers/ Refurbishers/ Manufacturers available on given link: https://ppcb.punjab.gov.in/en/entrepreneurs-information-corner

The following entities shall register on the centralized portal developed by CPCB:
I. Producer (P)
II. Importer (I)
III. Brand owner (BO)
IV. Plastic Waste Processor engaged in(a) recycling, (b)waste to energy, (c)waste to oil, and (d) industrial composting.

PIBOs which are operational in one or two states/UTs are required to register with the concerned with SPCB/PCC.

PIBOs Which are operational in more than two states/UTs are required to register with CPCB.

The Micro & Small category of Brand owners are exempted from fulfilling EPR obligation. Remaining all entities are required to be registered on Centralized EPR portal in line with notified EPR Guidelines.

The following plastic packaging categories are covered under EPR:
Category I: Rigid plastic packaging
Category II: Flexible plastic packaging of single layer or multilayer (more than one layer with different types of plastic), plastic sheets or like and covers made of plastic sheet, carry bags, plastic sachet or pouches
Category III: Multi layered plastic packaging (at least one layer of plastic and at least one layer of material other than plastic)
Category IV: Plastic sheet or like used for packaging as well as carry bags made of compostable plastics

Click on the document

Only entities engaged in plastic waste processing (recycling, co-processing, waste to energy, waste to oil) have to be registered as PWP.

PIBO will have to register as PIBO and as Recycler both with relevant documentation. Credits can only be issued to recyclers and transaction of credits to PIBO shall be documented.

i) PAN, CIN, GST of entity
ii) Aadhar of Authorized Person
iii) Registration certificate from District Industries Center (DIC) of the State Government or Union territory, if available
iv) Representative picture of packaged commodity covering different plastic categories under EPR
v) Manufacturing / Process flow Chart
vi) Consent copies under Water Act, 1974 and Air Act, 1981
vii) The combined copies of GST invoices in all the States/UTs where the PIBO is operating
viii) Upload pictures of the facility (with geo tagging)
a. Raw material storage area
b. Production process
c. Products dispatch area
d. Please enter video link of the plant
ix) Share latest Electricity Bill
x) Upload pictures of machine
xi) Attach Covering Letter (Only PDF)
xii) Upload signature (Only png / jpeg, jpg, gif)
xiii) Any Other Information & Self declaration of enterprise based upon Audited Statement (Only PDF)

i) PAN, CIN, GST of entity
ii) Aadhar of Authorized Person
iii) Registration certificate from District Industries Center (DIC) of the State Government or Union territory, if available
iv) Manufacturing / Process flow Chart
v) Upload pictures of the facility (with geo tagging)
a. Raw material storage area
b. Production process
c. Products dispatch area
d. Please enter video link of the plant
vi) Share latest Electricity Bill
vii) Upload pictures of machine
viii) Attach Covering Letter (Only PDF)
ix) Upload signature (Only png / jpeg, jpg, gif)
x) Any Other Information & Self declaration of enterprise based upon Audited Statement (Only PDF)
xi) Consent copies under Water Act, 1974 and Air Act, 1981
xii) Occupational Safety and health Aspects
xiii) Disaster Management Plan
xiv) Fire and accident mitigate measures

Hazardous waste is waste that has substantial or potential threats to public health or the environment.

1. Hazardous waste is a type of dangerous goods. They usually have one or more of the following hazardous traits: ignitability, reactivity, corrosivity, toxicity. Listed hazardous wastes are materials specifically listed by regulatory authorities as hazardous wastes which are from non-specific sources, specific sources, or discarded chemical products.
2. Hazardous wastes may be found in different physical states such as gaseous, liquids, or solids. A hazardous waste is a special type of waste because it cannot be disposed of by common means like other by-products of our everyday lives. Depending on the physical state of the waste, treatment and solidification processes might be required. The Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and Their Disposal was signed by 199 countries, and went into effect in 1992. Plastic was added to the convention's list in 2019.

These are applicable to the management of hazardous and other wastes as specified in the Schedules appended to these rules but shall not apply to:

1. Waste-water and exhaust gases as covered under the provisions of the Water Act, 1974 and the Air Act, 1981 and the rules made there under and as amended.
2. Wastes arising out of the operation from ships beyond five kilometres of the relevant baseline as covered under the provisions of the Merchant Shipping Act, 1958 and the rules made there under and as amended.
3. Radio-active wastes as covered under the provisions of the Atomic Energy Act, 1962 and the rules made there under and as amended from time to time.
4. Bio-medical wastes covered under the BMW Rules made under the Act and as amended.
5. Wastes covered under the SWM Rules, made under the Act as amended.

1. To follow steps, namely prevention, minimization, reuse, recycling, recovery, utilisation including co-processing & safe disposal.
2. To send or sale the hazardous and other wastes generated in the establishment to an authorised actual user or to dispose it off in an authorised disposal facility.
3. To transport the hazardous and other waste from the establishment to an authorised actual user or to an authorised disposal facility in accordance with the provisions of these rules.

1. New Users: Registration through OCMMS Portal (https://pbocmms.nic.in)
2. Already Registered Users: Login and apply for authorisation by using user ID & password.
3. Detailed procedure is available in the OCMMS User Manual for Entrepreneurs. (https://pbocmms.nic.in/OCMMS-0.1/SPCB DOCUMENTS/HWM.pdf).

1. CTE and CTO granted by the PPCB under Water Act, 1974 & Air Act, 1981
2. Site Plan of the industry showing the location of hazardous waste storage area / room.
3. Partnership Deed / Memorandum of Article of Association/Proprietorship certificate.
4. Resolution of Board of Director/partners regarding authorized signatory.
5. Manufacturing process details with flow chart.
6. Agreement signed with Common Facility (TSDF), actual user (Re-processor / Co- processor) of hazardous waste (as the case may be)
7. Annual return in Form -IV as prescribed under the Rules.
8. Compliance of SOPs prescribed by CPCB (wherever applicable)
9. In case of renewal of authorisation, a self-certified compliance report in respect of effluent, emission standards and the conditions specified in the authorisation for hazardous and other wastes provided that an application for renewal of authorisation may be made 3 months before the expiry of such authorisation.
   Note: No processing fee is to be deposited with the authorisation application.

5 years.

Occupiers of facilities may store the hazardous and other wastes for a period not exceeding ninety days and shall maintain a record of sale, transfer, storage, recycling, recovery, pre-processing, co processing and utilisation of such wastes and make these records available for inspection.

• Actual User intending to import or transit for trans boundary movement of hazardous and other wastes specified in Part A and Part B of Schedule III shall apply in Form 5 to the MoEF&CC for the proposed import together
• Documents listed by MoEF&CC
• Prior informed consent of the exporting country in respect of Part A of Schedule III waste
• Send a copy of the application, simultaneously, to the concerned SPCB for information.
• Acknowledgement from SPCB shall be submitted to the MoEF&CC along with the application.

Other Wastes

For the import of other wastes listed in Part D of Schedule III, the importer shall not require the permission of the MoEF&CC.

Importer to furnish the required information as per Form 6 to the Customs authorities, accompanied with the following documents in addition to those listed in Schedule VIII, wherever applicable:

• Import license from Directorate General of Foreign Trade, if applicable;
• Valid consents under the Water Act, 1974 & the Air Act,1981.
• Authorisation under the HoW (M&TM) Rules, 2016 and under the E-Waste Rules,2016
• Importer who is a trader, importing waste on behalf of actual users, shall obtain one time
• Authorisation (OTA) from the PPCB online at https://pbocmms.nic.in.

Procedure of obtaining one-time authorisation (OTA) for Traders of other wastes (on behalf of actual user)

• New Users: Registration through OCMMS Portal (https://pbocmms.nic.in)
• Already Registered Users: Login and apply for authorisation (OTA) by using user ID & password.
• Detailed procedure is available in the OCMMS User Manual for Entrepreneurs.
• (https://pbocmms.nic.in/OCMMS-0.1/SPCB DOCUMENTS/HWM.pdf).
• Documents to be submitted with online OTA application
• Copy of TIN/VAT/GST Number
• Copy of Import/Export License issued from Directorate General of Foreign Trade.
• Site Plan/Location Plan of the Godown
• Land documents of storage godown such as Registration deed/Jamabandi/ Rent Deed/Lease Deed indicating details of the property
• Certificate/ NOC from the Concerned Authority regarding suitability of location for godown to be used for the storage of scrap/other waste, if not falls in industrial zones or the areas admissible as per Master Plan (From Municipal Authorities in case godown is within M.C. limit and District Town Planner in case godown is outside M.C limit)
• Online fee deposit amounting to 5000/-
• Upon successful issuance of OTA, the trader shall submit the request for permission to release the consignment at least one month in advance, along with a fee of Rs. 30/- per MT of other waste to be imported.
• Trader shall submit the quarterly report of the actual material imported and fee deposited for each quarter, by the 7th of proceeding month, to Environmental Engineer of the concerned RO. All the traders are required to register and obtained OTA with the Board through online system at OCMMS Portal (https://pbocmms.nic.in).
• In case, One Time Authorisation (OTA)/permission to release the consignment is not issued within 21 days it can be auto generated from the system itself.

Any occupier intending to export waste specified in Part A of Schedule III, Part B of Schedule III and Schedule VI, shall make an application in Form 5 along with insurance cover to the MoEF&CC for the proposed transboundary movement of the hazardous and other wastes together with the prior informed consent in writing from the importing country in respect of wastes specified in Part A of Schedule III and Schedule VI.

TSDF Nimbua , Derabassi , Mohali.

National Hazardous Waste Tracking System is a GIS Based Hazardous Waste Management and Tracking System integrated with Online Consent Management and Monitoring System in the country developed by Central Pollution Control Board (CPCB), which shall be used to track the generation, transportation, storage, recycling, utilization and disposal of hazardous wastes across the country.

The NHWTS has modules for registration, daily records, e-manifest, geo- tracking of hazardous waste movement, filing of annual returns and dashboard. This application will function as single application for tracking the movement of hazardous wastes and resolves the issues pertaining to interstate movement of hazardous wastes.

Registration of Entities involved in the generation, transportation, storage, recycling, utilization and disposal of Hazardous Waste on National Hazardous Waste Tracking System (NHWTS) portal is compulsory. Registration can be done at http://geo.nic.in/nhwts/.

• Every urban local body (Megacity to Panchayat level),
• Outgrowths in urban agglomerations,
• Census towns stipulated by the Registrar General and Census Commissioner of India, notified areas,
• Notified industrial townships,
• Areas under the control of Indian Railways,
• Airports/airbases, Ports and harbours,
• Defense establishments,
• Special economic zones,
• State and Central government organisations,
• Places of pilgrims,
• Religious and historical importance may be notified by the respective State government from time to time and every domestic, institutional, commercial, and any other non-residential solid waste generator situated in the areas.

The rules highlight the importance of waste segregation at the source, place responsibility on manufacturers for packaging and sanitary waste disposal, and propose user fees for waste collection, processing, and disposal.

A Central Monitoring Committee, chaired by the Secretary of the Ministry of Environment, Forest, and Climate Change (MoEF&CC), oversees the general implementation of these Rules.

Waste producers are required to segregate their garbage into three categories: biodegradables, dry waste (plastic, paper, metal, wood), and domestic hazardous waste.

The Local Authorities are responsible for the development of infrastructure for collection, storage, segregation, transportation, processing and disposal of Municipal Solid Waste.

Manufacturers must provide a disposal bag or wrapper for sanitary waste with their products, ensuring proper handling of items like diapers and sanitary pads.

Brand owners using non-biodegradable packaging must establish a system to collect back the resulting packaging waste.

Yes, the rules introduce user fees for waste generators and spot fines for those found littering or violating waste management rules.

Biodegradable waste should be processed on-site through composting or bio- methanation, and the remaining waste should be handed over to waste collectors as directed by local authorities.

In order to obtain authorization under the rules, every village panchayat and local authority of census towns should file an application under Form 1 for setting up waste processing, treatment, or disposal facility. If waste generation is >5TPD. The following documents are required:-

• Project report on solid waste management
• Documents relating to land ownership for solid waste processing site
• Municipal Solid Waste Annual Report of the preceding year
• Authorization or work order issued to the operator of the solid waste processing facility (in case the site is being operated by the private operator).
• Technical details of waste to energy plant or recycling plant
• Permit from District level site selection committee.
  Detailed Standard operating procedure for applying authorization under SWM Rules, 2016 is attached (Annexure-1)

No, there is no fee for this. This is free of cost.

• The department related to land allocation must give appropriate land that is required for construction of the Solid Waste Management (processing and treatment) plants.
• The facility operator is required to obtain appropriate authorization and is responsible for the environmentally sustainable operations and procedure of solid waste in the facilities by SPCB/PCC (the State Pollution Control Board or Pollution Control Committee).

• Every waste generator shall,-
  • segregate and store the waste generated by them in three separate streams namely bio-degradable, non biodegradable and domestic hazardous wastes in suitable bins and handover segregated wastes to authorised waste pickers or waste collectors.
  • wrap securely the used sanitary waste like diapers, sanitary pads etc, in the pouches provided by the manufacturers or brand owners of these products and shall place the same in the bin meant for dry waste or non- bio- degradable waste;
  • store separately construction and demolition waste, as and when generated, in his own premises and shall dispose off as per the Construction and Demolition Waste Management Rules, 2016; and
  • Store horticulture waste and garden waste generated from his premises separately in his own premises and dispose of as per the directions of the local body from time to time.
• No waste generator shall throw, burn or burry the solid waste generated by him, on streets, open public spaces outside his premises or in the drain or water bodies.
• All waste generators shall pay such user fee for solid waste management, as specified in the bye-laws of the local bodies.
• No person shall organise an event or gathering of more than one hundred persons at any unlicensed place without intimating the local body.
• Every street vendor shall keep suitable containers for storage of waste generated during the course of his activity such as food waste, disposable plates, cups, cans, wrappers, coconut shells, leftover food, vegetables, fruits, etc., and shall deposit such waste at waste storage depot or container or vehicle.

Bulk waste generators means and includes building occupied by the Central Government Departments or undertakings, State Government Departments or undertakings, local bodies, public sector undertakings or private companies, hospitals, nursing homes, schools, colleges, universities, other educational institutes, hostels, commercial establishments, markets, places of worship, stadia and sports complexes having an average waste generation rate exceeding 100kg per day.

• All resident welfare and market associations shall, within one year from the date of notification of these rules and in partnership with the local body ensure segregation of waste at source by the generators as prescribed in these rules, facilitate collection of segregated waste in separate streams, handover recyclable material to either the authorized waste pickers or the authorized recyclers. The bio-degradable waste shall be processed, treated and disposed off through composting or bio-methanation within the premises as far as possible. The residual waste shall be given to the waste collectors or agency as directed by the local body.
• All gated communities and institutions with more than 5,000 sqm area shall, within one year from the date of notification of these rules and in partnership with the local body, ensure segregation of waste at source by the generators as prescribed in these rules, facilitate collection of segregated waste in separate streams, handover recyclable material to either the authorized waste pickers or the authorized recyclers. The bio-degradable waste shall be processed, treated and disposed off through composting or bio-methanation within the premises as far as possible. The residual waste shall be given to the waste collectors or agency as directed by the local body.
• All hotels and restaurants shall, within one year from the date of notification of these rules and in partnership with the local body ensure segregation of waste at source as prescribed in these rules, facilitate collection of segregated waste in separate streams, handover recyclable material to either the authorized waste pickers or the authorized recyclers. The bio-degradable waste shall be processed, treated and disposed off through composting or bio-methanation within the premises as far as possible. The residual waste shall be given to the waste collectors or agency as directed by the local body.

• Non recyclable waste having calorific value of 1500 K/cal/kg or more shall not be disposed of on landfills and shall only be utilised for generating energy either or through refuse derived fuel or by giving away as feed stock for preparing refuse derived fuel.
• High calorific wastes shall be used for co-processing in cement or thermal power plants.
• The local body or an operator of facility or an agency designated by them proposing to set up waste to energy plant of more than five tons per day processing capacity shall submit an application in Form-I to the State Pollution Control Board for authorization.

Battery means new or refurbished cell and/or Battery and/or their component, including accumulator, which is any source of electrical energy generated by direct conversion of chemical energy and includes disposable primary and/or secondary battery.

Waste Battery includes:

• Used and/or End of Life Battery and/or its components or spares or parts or consumables which may or may not be hazardous in nature.
• Pre-consumer Off-Spec Battery and its components or spares or parts or consumables.
• Battery whose date for appropriate use has expired.
• Batteries which have been discarded by the user.

EPR stands for ‘Extended Producer Responsibility’ which means responsibility of any Producer of Battery for Environmentally sound management of Waste Battery.

EPR targets is the quantity of battery placed in the market by the Producer/Manufacturer. Details are given in Schedule II of the Battery Waste Management Rules, 2022.

• manufacture and sale of Battery including refurbished Battery, including in equipment, under its own brand
• sale of Battery including refurbished Battery, including in equipment, under its own brand produced by other manufacturers or suppliers
• import of Battery as well as equipment containing battery.

As per Rule 4 (4), the person or an entity involved in manufacturing of Battery shall have to register through the online centralised portal as Producer in Form 1(A). The certificate of registration shall be issued in Form 1(B) from CPCB.

As per rule 3(1) (u), Importer of Battery as well as equipment containing Battery will be called 'Producer'. The Importer has to obtain registration from CPCB to carry out import activities related to battery.

The following entities shall register on the online portal developed by CPCB:

• Producer (Importers comes under the definition of Producer as per Rules)
• Manufacturers of Battery
• Recyclers and Refurbishers

PDF copy of Company’s PAN, CIN & GST of the Producer/Manufacturers.

No, importers have to obtain fresh registration from CPCB to carry out any import activities related to battery as well as equipment containing battery.

All types of batteries regardless of chemistry, shape, volume, weight, material composition and use, are covered under the Rules.

PAN of the authorized person is to be provided.

Importers shall have EPR Obligations under the following conditions:

1. Importers who sale the imported battery in the market under their own brand name.
2. Importers supplying the imported battery to other manufactures/dealers and themanufacturers/dealers is selling those batteries in the market under the brand name provided by the importer.
3. Importers supplying the imported battery directly to bulk consumers.
4. Importers selling the imported battery in the market under the name of the brand imported.

Importers shall not have EPR Obligations under the following condition:

“Importers supplying the imported battery to other manufactures/dealers and the manufacturers/dealers is selling those batteries in the market under their own brand name.”

1. If the dealer purchases the battery from a manufacturer or a producer and sales the battery under its own brand name, in this case, the dealer will be called a Producer and will have to register with The Dealer will also have EPR obligations as per rules.
2. If the dealer purchases or supplies the battery from manufacturer/s or a producer and sale them under the brand name provided by the manufacturer or producer, then the Dealer is not required to obtain CPCB or  SPCB.

If the company/brand is not placing the Battery in the Indian market, it will not have EPR obligations.

1. If a company/manufacturer is using a battery as a component in equipment’s, then the manufacture will have EPR obligation and have to register as producer if it is making batteries under its own brand name.
2. If a company/manufacturer is using battery provided by other battery manufacturer/producer, then it will not have any EPR obligations.

There is no separate registration certificate for EPR. Registration is only granted under Form 1(B) of the Rules.

As per rules 4(4), Manufacturer of the battery has to register as producer by CPCB.

1. Manufacturers shall have EPR Obligations under following conditions:
   1. Manufacturers who sale the battery in the market under their own brand name.
   2. Manufacturers supplying battery to other manufacturers/dealers and the other manufacturers/dealers is selling those batteries in the market under the brand name provided by the original manufacturers.
   3. Manufacturers supplying battery directly to bulk consumers.
2. Manufacturers shall have not EPR Obligations under following conditions:
   1. Manufacturers supplying battery to other manufacturers/dealers and the manufacturers/dealers is selling those batteries in the market under their own brand name.

Consumers/users of battery are not required to submit annual or half yearly returns. However, if any brand/company/industry/User is involved in import of any battery for in- house use, then it is mandatory to obtain registration from CPCB and they will be liable for EPR obligations. In this case, they will have to submit annual returns by 30th June.

The list of registered Recyclers and Refurbishers can be obtained through SPCBs/PCCs.

If a company, be it a refurbishment unit is involved in selling of battery under its own brand name, then as per rules they will be called 'Producer'. They will have to register with CPCB and will have EPR obligations.

Refer SoP given on CPCB website.

Importer shall mention their own brand name(s) and not the brand name(s) of the battery imported.

Noise is unwanted sound. Noise can be produced by many sources – public address systems, horns, construction equipment’s, appliances, apparatus, vocal or instrumental music, industrial activities, generator sets, aircraft, bursting of sound emitting fire crackers & other mechanical devices etc.

The unpleasant and undesirable sound which leads to discomfort in human beings is called Noise Pollution.

The adverse effects of noise pollution in humans are: High blood pressure, hearing loss, may affect the circadian rhythm (sleep cycles), Impair cognitive functions Irritability, high stress etc.

Some of the major causes are public address systems, horns, construction equipment’s, appliances, apparatus, vocal or instrumental music, industrial activities, generator sets, aircraft, bursting of sound emitting fire crackers & other mechanical devices etc.

The following are some preventive measures to reduce the noise pollution:

• Honking near public places like teaching institutes, hospitals, should be banned.
• The installation of Noise limiters on potential noise emitting devices.
• The commercial and industrial buildings should have adequate soundproof systems.
• Dense tree cover is useful in noise pollution prevention.

Decibels (dB)

Noise pollution.

The Noise Pollution (Regulation and Control) Rules, 2000.

Day time shall mean from 6.00 a.m. to 10.00 p.m.

Night time shall mean from 10.00 p.m. to 6.00 a.m.

The day time ambient air noise standards prescribed for residential area in India are 55 dB and night ambient air standards prescribed for residential area in India are 45dB.

1. No horn shall be used in silence zones or during night time in residential areas except during a public emergency.
2. Sound emitting fire crackers shall not be burst in silence zone or during night time.
3. Sound emitting construction equipment’s shall not be used or operated during night time in residential areas and silence zones.

Paddy Straw Pelletization Plant manufactures pellets made up of paddy straw.

Paddy Straw Pellets are used as fuel.

Brick Kilns, Thermal Power Plants and Industrial Boilers are potential consumers of Paddy Straw Pellets.

3000 – 4000 ft2

200 – 250 KW

5000 TPA

The main difference is presence of Torrefied reactor in Torrefied Paddy Straw Pelletization plant by which physical properties of paddy straw pellets changed resulting in high caloric value and ash content.

Calorific Value of Non Torrefied Paddy Straw Pellets is 3200 Kcal/kg whereas of Torrefied Pellets is 4200 Kcal/kg.

Yes Central Pollution Control Board has launched one time financial support for such kind of plants.

One time financial support to the tune of 40% on plant and machinery is given by CPCB.

Consent to establish (NOC) of Punjab Pollution Control Board is the prime requirement alongwith some other documents.

Er. Sukhdev Singh, Environmental Engineer (Mob No. 9501005783) is Nodal Officer who can assist for providing detailed information for availing one time financial support.

Yes Govt has issued notification for 20% mandatory partial replacement of coal with paddy straw pellets in brick kilns.

Any waste, which is generated during the diagnosis, treatment or immunization of human beings or animals or research activities pertaining thereto or in the production or testing of biological or in health camps, including the categories mentioned in Schedule I appended to BMW Rules 2016. A poster indicating the categories of Bio-medical waste, its treatments and important instructions for HCFs can be downloaded from the link given below:

https://drive.google.com/file/d/13VCLtYjxlND8aQ8I4kG5v_1w6piLxZDt/view?usp=drive_link

The following entities shall obtain authorization under BMW Rules 2016:

i) Hospitals

ii) Nursing homes

iii) Clinics

iv) Dispensaries

v) Veterinary institutions

vi) Animal houses

vii) Pathological laboratories

viii) Blood banks

ix) Ayush hospitals

x) Clinical establishments

xi) Common Biomedical waste treatment facility (CBWTF)

xii) Research or educational institutions

xiii) Health camps

xiv) Medical or surgical camps

xv) Vaccination camps

xvi) Blood donation camps

xvii) First aid rooms of schools

xviii) Forensic laboratories

xix) Research labs

i) Simplified procedure for obtaining authorisation by small HCFs upto 20 beds by allowing auto- grant and auto-renewal of authorisation within 7 days

ii) No inspection of the HCF

iii) Applicable only to those HCFs against whom that no action is pending against the concerned health care facility for violation of the Bio-Medical Waste Management Rules, 2016, Water Act, 1974, Air Act, 1981, EPA, 1986 and various rules.

Click on the link

Click on the link

Click on link

Click on link

Click on the link

i) Site Plan

ii) Location Plan

iii) Copy of Agreement with CBWTF

iv) Affidavit/Self Declaration for Bed Capacity

v) Affidavit Self Declaration for Ownership

vi) Affidavit/Self Declaration for Liquid Waste Treatment

vii) Compliance Report of previous Authorization (in case of renewal)

viii) Copy of the manifests of lifting of waste

ix) Copy of the previous Annual Report (in case of renewal)

i) Location Plan / Google Location of HCF

ii) Copy of Agreement with CBWTF

iii) Self-declaration

iv) Copy of the manifests of lifting of waste by CBWTF operators for 7 days pertaining to previous one month

Every occupier or operator of common bio-medical waste treatment facility shall furnish an annual report online at OCMMS portal of PPCB at (https://pbocmms.nic.in) to the Board in Form IV on or before the 30th June of every year

Sure!

We will help you.

Non-polluting white Category of industries / projects are exempted from obtaining PPCB consent to Establish (NOC)/operate.

Click to View

A system generated exemption certificate can be obtained by simply registering through a simplified online form at https://ppcb.punjab.gov.in

Consent to Establish (NOC) is required from PPCB before establishing a unit.

Whereas, consent to operate (CTO) under Water Act 1974 and Air Act 1981 is required for operation of unit.

Help desk of Regional Offices and Head Office.

List attached

Click to view

Click to view

Click to view

You can establish your industry in

• Industrial Areas notified by the Govt.
• Industrial Zone as per notified Master Plans
• Areas confirming to siting guidelines prescribed by State Govt./PPCB for certain categories of units

Click to view

• Confirming to general guidelines, where Master Plans not notified.
• In mix land/other zones, subject to permission by Competent Authority.

Click to view

Can be established in the permissible zones allowed in the master plan and subject to fulfilment of certain other guidelines prescribed by the PPCB/State Govt.

Projects outside the master plan need to confirm the siting guidelines prescribed by the State Govt. for such establishment.

Click here

Brick Kilns are only allowed to set up in areas confirming to certain siting guidelines prescribed by the Board/Central Govt.

Click to view

Yes, You can.

Click to view

Yes, Rice sheller can be establish in approved industrial area/zone.

For areas (other than industrial), State Govt. has prescribed certain siting guidelines which are required to be fulfilled.

Click to view

State Govt. & CPCB has prescribed a set of siting and environmental guidelines.

Click to view

There are certain siting guidelines for establishment of cement plants/grinding units. These are to be fulfilled.

Click to view

Central Govt. and State Govt. has prescribed siting guidelines as well as SOPs for Jaggery units, which you have to fulfil.

Click to view

No.

Marriage Palace can be established in areas allowed by the Competent Authority (Municipal Body-within MC limits and Deptt. of Town and Country Planning- Outside MC limits)

Click to view

State Govt. has prescribed certain siting guidelines for Stone Crushing/ washing/screening unit which are required to be fulfilled.

Click to view

State Govt. has prescribed certain siting guidelines for Hot mix plants which are required to be fulfilled.

Click to view

As the CPCB has prescribed certain siting and environmental guidelines for the establishment of poultry farms.

Click to view

Yes, CPCB/PPCB has prescribed guidelines for establishment and environmental compliances of Hallmarks centres.

Click to view

CPCB/PPCB has prescribed guidelines for setting up of petrol pumps/gas stations.

Click to view

CPCB notified guidelines are as under:

Click to view

Yes. Dairies are big source of solid waste and water pollution and pollute our drains/rivers. CPCB has notified guidelines for such establishments.

Click to view

CPCB has notified guidelines for such establishments which are required to be fulfilled by the gaushalla managements.

Click to view

Yes, but for a certain period as per the provisions laid down under Master Plan (15 yrs from the date of notification of Master Plan).

Depending upon pollution potential, industries are defined as Red, Orange, Green and White.

Here, ‘Red’ represents the major polluting industry while ‘White’ are the non-polluting units.

Red: Click to view

Orange: Click to view

Green: Click to view

White: Click to view

CPCB has categorized 17 industrial sectors as highly polluting industries.

Click to view

Industries discharging effluent into water course and a) handling hazardous chemicals as specified in Manufacturing, Import, Storage of Hazardous Chemicals Rule, 1989, or b) effluent having BOD load of 100 Kg per day or more, or c) a combination of (a) and (b).

Yes, through Online Consent Management & Monitoring System (OCMMS)

Click to view

Step 1 : Register as new user on the Invest Punjab portal at following link :

Click here.

Step 2 : After registration and getting user ID, login at following link and apply for NOC.

Click here

Documents for NOC/consent to establish at
Click to view

Documents for consent to operate after obtaining NOC

Click to view

• Declaration of bed capacity/dental chair to be installed (for HCFs).
• Details of treatment and disposal arrangements for effluent in case of polluting industry/HCFs /common facility etc. (wherever required)
• Permission for disposal of effluent by industries/HCFs / other projects into public sewer from the concerned authority.

Permission for disposal of municipal solid waste by industries/HCFs/other projects onto common facility from the concerned authority.

Industries / Other Establishments : Click to view

LocalBodies : Click to view

HCFs and CBWTFs: Click to view

D.G. sets (Commercial Establishments): Click to view

Internet Banking/ Credit Card/ Debit Card/ NEFT/ RTGS (other than PNB a/c only)

PPCB A/c No. 2918000100261206

IFSC Code: PUNB0291800

Click to view

For a period of minimum one year and maximum upto 5 yrs.

• Request letter giving the reason for non-completion project in stipulated time.
• Status report regarding installation of pollution control devices vis-à-vis main project.
• 50% of NOC Fee per year for the period for which extension is sought as per the total project cost

Maximum validity:

Red: 5 Years

Orange: 10 Years

Green: 15 Years

Existing units in non-designated area can operate upto 15 yrs from the date of notification master plan of the area in which it is located.

After completion of the project, it is mandatory on the part of every project proponent to obtain consent of the Board for operating an outlet for discharge of effluents, under Water Act 1974 and for discharge of gaseous emissions Air Act 1981

For the grant of regulatory clearances like CTE, CTO, Authorisation or Registration, Board, besides the documents mentioned above in the procedure for grant of CTE/CTO may ask for any NOC/Certificate to be issued by other departments from the list notified by the Govt. of Punjab, Department of Science Technology & Environment vide no. STE-STEB10/25/2022-STE4/325110 dated 02.03.2022 or any other clearance from stakeholders to protect any adverse effect on the sensitive receptors.

Click to view

Small Scale Units and Hospital/HCF upto 50 beds can avail this facility through online system.

Click to view

The entrepreneur would self-certify that all the data/information provided in the application is correct and is complying with the environmental laws

The entrepreneur would also have an option to submit a ‘third party inspection report’ from the list of Chartered Engineers/Institutions empanelled by the Board

Click to view

Yes.

You can file an appeal before the Appellate Authority.

Click to view

Upon the receipt of request of the industry/ project proponent regarding restoration of electric connection of the industry / project and release of Bank Guarantee, the concerned Regional Office/ Zonal office shall initially make recommendations for the restoration of electric connection temporarily for a period of six months to access the adequacy of pollution control arrangements.

Permanent restoration of power supply / release of bank Guarantee shall be considered only after adjudging the adequacy/ efficacy of the treatment system on the basis of three effluent / emission sample collected on different date and these sample must comply with the effluent/ emission samples Sample.

Industrial and other developmental projects & activities appended to schedule-I of EIA notification dated 14/9/2006 are required to obtained environment clearance.

Click to view

Ministry of Environment, Forest and Climate Change (MoEF &CC) or State Level Environment Impact Assessment Authority (SEIAA), duly constituted by the Central Govt. as the case may be.

SEIAA (State Environment Impact Assessment Authority)

MGSIPA, Punjab Institutional Area,

Sector 26, Chandigarh

Board has approved Charted Engineers and Charted Institutions to facilitate the industries/project proponent to fulfil the environmental obligations.